trusted by atheletes
All over the world
Designed to withstand the elements
A four anchor point design that keeps your cables and brake hoses free to move and prevent damage.
Fit the Harness at the start of the trip and no adjustments needed till you're home again.
We have designed this product from the ground up. We wanted a harness that could cope with rough single track loaded riding day after day. A design that would stay off the head tube and keep your cables/brake hoses free to move to prevent damage. This design boasts the advantage that once fitted it can be left secured to your bike for your entire trip.
The harness is secured to the front of your bike using a webbing strap either side of your stem. These straps feed through a tri-glide buckle and cinched down through a ladder lock. This attachment design provides an adjustable set-up you can tailor to your bike. The dry bag is simple to fit to the harness thanks to a pair of side release came buckles that attach at the front of the harness. These buckles click together holding a dry bag in place and then can be pulled tight and clamped in place.
This harness allows you to use any dry bag so you can tailor your storage capacity depending on your trip.
- Made from durable water-resistant Cordura® or waterproof X-Pac® fabrics
- Closed-cell foam centre for additional protection
- Compatible with all styles of handlebar
- Ultra-secure attachment design that can handle the roughest of rides
- Cable/hose protective design
- Flexible storage capacity
- Attachment compatibility - Handlebar to fork crown dimensions - 190mm to 250mm
- Weight – 135g : 4.6oz (weight will vary depending on chosen fabrics)
- Bartacked at all attachment points for strength
Place your order by following the panel selection guide to fill in your chosen fabrics.
We have a 7 to 14 day lead time for custom harness's as they are handmade to order in our Edinburgh studio.
We have a wide range of styles and colours available. Follow the link below to fina in-depth information and images. Click here
This harness design required 4 anchor points : two points on the handlebar and two points on a fork crown. Which means it will work with every style of handlebar from flat, drop to jones.
This harness has been tested with dry bags ranging from 3 to 20 litres.
8kg : 282 oz
No, this design requires both fork crowns as anchor points to work properly.
Your bag will be made to order. We operate on a lead time of 7 to 14 days from order confirmation.
Yes, if you would like to collect from our Edinburgh design studio this can be selected at the checkout.